I.S. CODES FOR BUILDING DESIGN

-

 Here is the list of some important IS code which used for design of building.




1- IS 456:200  (CODE OF PRACTICE FOR PLAIN AND REINFORCED CONCRETE):- In this IS code we study for PCC (plain cement concrete) & RCC (reinforced cement concrete)

Download Link

2- IS 1343 - 1980  ( CODE OF PRACTICE FOR PRESTRESSED CONCRETE:- In this IS code we study about prestressed concrete.

Download Link

3- IS 875-1987 (CODE OF PRACTICE FOR DESIGN LOADS):- In these IS codes we find the standard values of loads of different kind of materials, structures, & components of buildings etc.

PART 1

PART 2

PART 3

4- IS 800-2007 ( CODE OF PRACTICE FOR GENERAL CONSTRUCTION IN STEEL):- In this IS codes we get the details about the steel structures their joint connections etc. 

Download Link

5- IS 1893:1984  (Criteria for Earthquake Resistant Design of Structures) (Part 1 : General provisions and Buildings):- In this IS codes we learn about the analysis of earthquake resistance structures how it's work.

Download Link

6- IS 13920:1997  (DUCTILE DETAILING OF REINFORCED CONCRETE STRUCTURES SUBJECTED TO SEISMIC FORCES -CODE OF PRACTICE ).:- In this IS code we learn about the Ductile detailing of the structure subjected to seismic forces.

Download Link


For the download of other IS code click here


Comments

Post a Comment

Advertisement

Popular posts from this blog

HOW TO PREPARE METHODOLOGY OR METHOD STATEMENT OF CONSTRUCTION WORK

-
Image
Here I am going to discuss how to prepare a method statement for construction activities step by step: Content :- In this with we write the content which included in the document serial wise. PURPOSE SCOPE RESPONSIBILITY CONTROLLING SPECIFICATION MATERIAL TOOLS & TACKLES PROCEDURE INSPECTION DOCUMENTATION 1. PURPOSE:- In this we write the purpose of the procedure which includes all activities. 2. SCOPE:- In this we write about the scope of the work, which includes activity name and name of part of construction work. 3. RESPONSIBILITY:- We include the persons who are responsible for the the activity such as project manager, engineer, supervisor. 4. CONTROLLING  SPECIFICATION:- In section we include which standards and specification are used for the activity. 5. MATERIAL:- In this we include the the all kind of materials used for the work with name of material and brand. 6. TOOLS & TACKLES:- In this we include name of the tools and tackles used for the work or activi
Read more

Description about mortar, classification, properties, tests & uses of mortar

-
Image
  ·          Building mortar is define as a mixture of cement, sand and water. ·          Mortar is similar to concrete but it does not contain coarse aggregate. ·          Mortar are used for filing joints as a binder in stone and brick masonry   Bulking of sand ·          In the case of aggregates there is another effect of the presence of moisture viz. bulking which is an increase in the volume of a given sand particle apart. for a moisture content of about 5-8 % depending upon the   increase of volume may be as much as 20-40% depending upon the grading of sand . ·          Finer the materials more will be the increase in volume for a given moisture content. Classification of mortars ·          Mortars are classified on the basis of the following. (i)             Bulk density (ii)           Kind of binding materials (iii)          Naturals of application (iv)          Special mortars Properties of a good mortar The important properties of good mortar mix are mobility, place and wate
Read more